The Road Authority

ADS 300 - 1,500 mm (12 - 60") SaniTite HP Profile Polypropylene (PP) Pipe

Manufactured by ADS Canada (Advanced Drainage Systems)
Brand: SaniTite®

Polypropylene (PP) profile wall pipe with smooth interior, in diameters of 300 to 1500 mm (12" to 60"), and with patented extended reinforced bell, double gasketed composite joint for continuous internal and/or external pressure, applicable for watertight gravity flow such as industrial wastewater, municipal sanitary sewers, and storm sewers. Certified to CSA B182.13 and meets ASTM F2764 and AASHTO M 330.

Categories: 
Drainage and Sewer Works | Sanitary Sewers | Pipe | Polypropylene (PP)
Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Polypropylene

Certifications: PMC - Accepted for Use Durham Region Approved Products List

Prequalification Lists: 
Regional Municipality of Durham - 4.70.62.65 - Polypropylene (PP) (PDF)
Regional Municipality of Durham - 4.72.62.65 - Polypropylene (PP) (PDF)
  • Ontario Provincial Standards
    • OPSD 806.030 - Height of Fill Table, Dual and Triple Wall Corrugated Polypropylene Gravity Sewer Pipe 320 kPa
    • OPSS.MUNI 1843 - Non-Pressure Polypropylene (PP) Plastic Pipe Products
    • OPSS.MUNI 410 - PIPE SEWER INSTALLATION IN OPEN CUT
    • OPSS.MUNI 421 - PIPE CULVERT INSTALLATION IN OPEN CUT
    • OPSS.PROV 1843 - Non-Pressure Polypropylene (PP) Plastic Pipe Products
    • OPSS.PROV 410 - PIPE SEWER INSTALLATION IN OPEN CUT
    • OPSS.PROV 421 - PIPE CULVERT INSTALLATION IN OPEN CUT
  • ASTM International
    • ASTM D1238-20 - Flow Rates of Thermoplastics by Extrusion Plastometer
    • ASTM D1693-21 - Environmental Stress-Cracking of Ethylene Plastics
    • ASTM D2122-22 - Determining Dimensions of Thermoplastic Pipe and Fittings
    • ASTM D2321-20 - Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
    • ASTM D2412-21 - Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    • ASTM D2444-21 - Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    • ASTM D256-10(2018) - Determining the Izod Pendulum Impact Resistance of Plastics
    • ASTM D2990-17 - Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
    • ASTM D3212-21 - Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
    • ASTM D618-21 - Conditioning Plastics for Testing
    • ASTM D638-22 - Tensile Properties of Plastics
    • ASTM D6992-16 - Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
    • ASTM D790-17 - Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
    • ASTM D792-20 - Density and Specific Gravity (Relative Density) of Plastics by Displacement
    • ASTM F1417-11a (2019) e1 - Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
    • ASTM F2487-21 - Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
    • ASTM F2764/F2764M-19 - 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    • ASTM F477-14 (2021) - Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • Canadian Standards Association
  • Other Standards
  • American Society for Testing and Materials
    • ASTM F3058 - Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines

© 1997 - 2025. The Road Authority. All rights reserved.

Terms of use | Privacy policy