Maintenance Hole Adjustment Unit - LIFESAVER

Manufactured by IPEX Inc.
Brand: Lifesaver - Maintenance Hole Adjustment Unit

High density polyethylene (HDPE) adjustment units/rings, in 30, 38 & 50 mm thicknesses, and sloped units from 19 mm to 43 mm to support frame and grates and act as shock absorber.

Categories:

Drainage and Sewer Works | Maintenance Hole, Catch Basin, Ditch Inlet Units and Valve Chambers | Accessories | Adjustment Units | Plastic

Electrical, Illumination, Communications and Traffic Related Works | Maintenance Holes, Handholes and Junction Boxes | Frames and Covers | Adjustment Units

Certifications: PMC - Accepted for Use Durham Region Approved Products List

Prequalification Lists:

Regional Municipality of Durham - 4.70.48.63 - HDPE, Below Frame (PDF)

Regional Municipality of Durham - 4.72.48.63 - HDPE, Below Frame (PDF)

Ontario Provincial Standards
- OPSD 2117.010 - Electrical Maintenance Holes General Installation Requirements
- OPSD 704.011 - High Density Polyethylene Adjustment Units for Maintenance Holes, Catch Basins and Valve Chambers
- OPSS.MUNI 1854 - High Density Polyethylene (HDPE) and Expanded Polystyrene (EPS) Adjustment Units for Maintenance Holes, Catchbasins, and Valve Chambers
- OPSS.MUNI 407 - Maintenance Hole, Catch Basin, Ditch Inlet and Valve Chamber Installation
- OPSS.MUNI 408 - Adjusting or Rebuilding Maintenance Holes, Catch Basins, Ditch Inlets, and Valve Chambers
- OPSS.PROV 1854 - High Density Polyethylene (HDPE) and Expanded Polystyrene (EPS) Adjustment Units for Maintenance Holes, Catchbasins, and Valve Chambers
- OPSS.PROV 407 - Maintenance Hole, Catch Basin, Ditch Inlet and Valve Chamber Installation
- OPSS.PROV 408 - Adjusting or Rebuilding Maintenance Holes, Catch Basins, Ditch Inlets, and Valve Chambers
ASTM International
- ASTM D1248-12 - Polyethylene Plastics Extrusion Materials For Wire and Cable
- ASTM D543-06 - Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D638-14 - Tensile Properties of Plastics
- ASTM D792-08 - Density and Specific Gravity (Relative Density) of Plastics by Displacement

Manufacturer
- IPEX Inc.
Distributor
- Emco Waterworks
- Underground Specialties
- Wolseley Waterworks Group

Alex Sandovski, Municipal Sales Engineer
IPEX Inc.
6810 Invader Crescent
Mississauga ON L5T 2B6
alex.sandovski@ipexna.com
http://www.ipexna.com
Cellular: 416-258-6261
Office: 905-670-7676 x825
Fax: 416-258-6261

Maintenance Hole Adjustment Unit - LIFESAVER

About

Membership

Links