Pipe, HDPE, Polytite

Manufactured by Armtec Inc.
Brand: Polytite

Flexible high density polyethylene pipe, smooth inside and corrugated outside, with Bell and Spigot coupler for sanitary sewer-flexible & rigid (rigid pipe as defined by MTO).

https://armtec.com/drainage-pipe/boss-poly-tite-hdpe-pipe/

Categories:

Drainage and Sewer Works | Sanitary Sewers | Pipe | Polyethylene (HDPE)

Drainage and Sewer Works | Sanitary Sewers | Pipe Accessories | Fittings

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Polyethylene

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Rigid Pipe

Certifications: PMC - Accepted for Use Durham Region Approved Products List Region of Halton Prequalified Products List

Prequalification Lists:

Regional Municipality of Durham - 4.72.62.64 - High Density Polyethylene (HDPE) (PDF)

Regional Municipality of Halton - 4.70.62.64 - Polyethylene (HDPE) (PDF)

Ontario Provincial Standards
- OPSD 207.044 - Subdrain Pipe Connection and Outlet for Open Graded Drainage Layer
- OPSD 806.020 - Height of Fill Table, Dual Wall Corrugated Polyethylene Gravity Sewer Pipe - 320 kPa and RSC 160
- OPSS 1840 - Non-Pressure Polyethylene Plastic Pipe Products
- OPSS.MUNI 1840 - Non-Pressure Polyethelene Plastic Pipe Products
- OPSS.MUNI 410 - Pipe Sewer Installation in Open Cut
- OPSS.MUNI 412 - Sewage Forcemain Installation in Open Cut
- OPSS.PROV 1840 - Non-Pressure Polyethelene Plastic Pipe Products
- OPSS.PROV 410 - Pipe Sewer Installation in Open Cut
ASTM International
- ASTM D3212-07(2013) - Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
- ASTM D3350-14 - Polyethylene Plastics Pipe and Fittings Materials
- ASTM F477 - Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Canadian Standards Association
- CAN/CSA-B182.6-11 [See B1800 Series-11] - Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak-proof Sewer Applications
- CAN/CSA-B182.8-11 [See B1800 Series-11] - Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings
American Association of State Highway and Transportation Officials
- AASHTO M252-09-UL - Corrugated Polyethylene Drainage Pipe
- AASHTO M294-13-UL - Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60- in.) Diameter
Other Standards
- NQ 3624-120 - Polyethylene (PE) Plastic Pipe and Fittings - Smooth Inside Wall Open or Closed Profile Pipes for Storm Sewer and Soil Drainage - Characteristics and Test Methods

Manufacturer
- Armtec Inc.

Rodrigo Silva, Regional Stormwater Specialist
Armtec Inc.
605 Sheldon Drive
Cambridge ON N1T 2K1
rodrigo.silva@armtec.com
http://www.armtec.com
Phone: 226-868-8440
Toll Free: 800-565-1152
Fax: 519-620-6042

Dave Kanters, HDPE Product Engineer
Armtec Inc.
301 Rokeby Sideroad
Tillsonburg Ontario N4G 4G7
dave.kanters@armtec.com
Phone: 519-546-4146

Pipe, HDPE, Polytite

About

Membership

Links