Search Results
Standard List
- Ontario Provincial Standards
- Region of Durham
- City of London
- Ontario Statutes, Regulations, etc
- ASTM International
- Canadian Standards Association
- Other Standards
- American Association of State Highway and Transportation Officials
- American Concrete Institute
- American National Standards
- American Society of Mechanical Engineers
- American Water Works Association
- Bureau de Normalisation du Québec
- Canadian Council of Independent Laboratories
- Comité Européen de Normalisation/European Committee for Standardization/Europaisches Komitee fur Normung
- British Standards
- BS 1376:1974 Specification for colours of light signals
- BS 1391:1952 (Withdrawn) Performance tests for protective schemes used in the protection of light-gauge steel and wrought iron against corrosion
- BS 1400:1985 (Withdrawn, Superseded) Replaced by E Copper alloy ingots and copper alloy and high conductivity copper castings
- BS 1452:1977 (Withdrawn, Revised) Specification for grey iron castings
- BS 1452:1990 (Withdrawn, Superseded) Replaced by E Specification for flake graphite cast iron
- BS 1881-122:2011 Testing concrete. Method for determination of water absorption
- BS 2571:1990 General-purpose flexible PVC compounds for moulding and extrusion
- BS 2789:1985 (Withdrawn, Superseded) Specification for spheroidal graphite or nodular graphite cast iron
- BS 4147:1980 (Withdrawn) Bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required.
- BS 4504-3.3:1989 (Withdrawn) Circular flanges for pipes, valves and fittings (PN designated). Specification for copper alloy and composite flanges
- BS 4987-1:2005 (Withdrawn, replaced by BS EN 13108 Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for mixtures
- BS 5163-1:2004 Valves for waterworks purposes. Predominantly key-operated cast iron gate valves. Code of practice
- BS 5750-14:1993 ( EN 60300-1:1993 ISO 9000-4:1993, Quality systems. Guide to dependability programme management
- BS 5750-8:1991 ( EN 29004-2:1993 ISO 9004-2:1991) Quality systems. Guide to quality management and quality systems
- BS 5896:2012 High tensile steel wire and strand for the prestressing of concrete.
- BS 594-1:2005 Hot rolled asphalt for roads and other paved areas. Specification for constituent materials and asphalt mixtures
- BS 6088:1981 (Replaced by BS EN 1423:1998) Solid glass beads for use with road marking compounds and for other industrial uses
- BS 6744:2001 Austenitic stainless steel bars for the reinforcement of concrete
- BS 6920-2.1:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water.
- BS 8007:1987 Code of practice for design of concrete structures for retaining aqueous liquids
- BS 8102:1990 Code of practice for protection of structures against water from the ground
- BS 8110-1:1997 Structural use of concrete. Code of practice for design and construction
- BS 8905:2011 Framework for the assessment of the sustainable use of materials. Guidance
- BS 903-A2:1995 ( ISO 37:1994) Physical testing of rubber. Method for determination of tensile stress-strain properties.
- BS 903-A3.2:1997 ( ISO 34-1:1994) Physical testing of rubber. Determination of tear strength. Small (Delft) test pieces
- BS 903-A8:1990 Physical testing of rubber. Method for determination of rebound resilience.
- BS EN 1015-17:2000 Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars
- BS EN 1062-3:2008 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of liquid water permeability
- BS EN 1062-6:2002 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability
- BS EN 12190:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar
- BS EN 124 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
- BS EN 124-1 (Draft) Gully tops and manhole tops for vehicular and pedestrian areas - Part 1. Classification, General Design, Performance and Testing Requirements, Test Methods and Evaluation of Conformity
- BS EN 12617-4:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion
- BS EN 12899-1:2007 Fixed, vertical road traffic signs. Fixed signs
- BS EN 12899-3:2007 Fixed, vertical road traffic signs. Delineator posts and retroreflectors
- BS EN 1317-1:1998 Road restraint systems. Terminology and general criteria for test methods
- BS EN 1317-2:1998 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for safety barriers
- BS EN 1317-3:2000 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for crash cushions
- BS EN 1317-4:2000 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
- BS EN 1337-5:2005 Structural bearings. Pot bearings
- BS EN 13412:2006 Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
- BS EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements. Classification using test data from reaction to fire tests
- BS EN 13529:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack
- BS EN 13579:2002 Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
- BS EN 13687-1:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icing salt immersion
- BS EN 1423:1998 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two
- BS EN 1426:2007 Methods of tests for petroleum and its products. Bitumen and bituminous binders. Determination of needle penetration
- BS EN 1427:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of softening point. Ring and ball method
- BS EN 1436:2007 A1:2008 Road marking materials. Road marking performance for road users
- BS EN 14388:2005 Road traffic noise reducing devices. Specifications
- BS EN 14525:2004 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
- BS EN 1463-1:2009 Road Marking Materials. Reflecting Road Studs. Initial Performance Requirements
- BS EN 14630:2006 Products and systems for the protection and repair of concrete structures. Test methods. Determination of carbonation depth in hardened concrete by the phenolphthalein method
- BS EN 1504-2:2004 Definitions, requirements, quality control and evaluation of conformity. Surface protection systems for concrete
- BS EN 1504-3:2005 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural and non-structural repair
- BS EN 1504-4:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural bonding
- BS EN 1504-5:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Concrete injection
- BS EN 1504-6:2006 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Anchoring of reinforcing steel bar
- BS EN 1504-7:2006 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Reinforcement corrosion protection
- BS EN 1504-8:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Quality control and evaluation of conformity
- BS EN 15183:2006 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
- BS EN 1542:1999 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off
- BS EN 1561:1997 Founding. Grey cast irons
- BS EN 1563:1997 Founding. Spheroidal graphite cast iron
- BS EN 16236 Evaluation of Conformity of Aggregates - Initial Type Testing and Factory Production Control
- BS EN 1766:2000 Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
- BS EN 1767:1999 Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
- BS EN 1793-1:1998 Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of sound absorption.
- BS EN 1793-2:1998 Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation.
- BS EN 1794-1:2011 Road traffic noise reducing devices. Non-acoustic performance. Mechanical performance and stability requirements.
- BS EN 1794-2:2003 Road traffic noise reducing devices. Non-acoustic performance. General safety and environmental requirements
- BS EN 1982:1999 Copper and copper alloys. Ingots and castings
- BS EN 206:2013 Concrete. Specification, performance, production and conformity
- BS EN 55022:1998 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
- BS EN 55024:1998 Information technology equipment.Immunity characteristics.Limits and Methods of Measurement
- BS EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code)
- BS EN 61000-6-1:2001 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
- BS EN 970-1:1996 Wrought steels for mechanical and allied engineering purposes. General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
- BS EN ISO 10140-1:2010+A1:2012 Acoustics. Laboratory measurement of sound insulation of building elementsApplication rules for specific products
- BS EN ISO 10140-2:2010 Acoustics. Laboratory measurement of sound insulation of building elementsMeasurement of airborne sound insulation
- BS EN ISO 10140-3:2010 Acoustics. Laboratory measurement of sound insulation of building elements. Measurement of impact sound insulation
- BS EN ISO 10140-4:2010 Acoustics. Laboratory measurement of sound insulation of building elements. Measurement procedures and requirements
- BS EN ISO 11654:1997 Acoustics. Sound absorbers for use in buildings. Rating of sound absorption
- BS EN ISO 140-3:1995 (Withdrawn) Acoustics. Measurement of sound insulation in buildings and of building elements
- BS EN ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I). Requirements and Test Methods
- BS EN ISO 4892-2:2013 Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
- BS EN ISO 5470-1:1999 Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Taber abrader
- BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
- BS EN ISO 6892-2:2011 Metallic materials. Tensile testing. Method of test at elevated temperature
- BS EN ISO 7783:2011 Paints and varnishes. Determination of water-vapour transmission properties. Cup method
- BS EN ISO 945-1:2008 Microstructure of cast irons. Graphite classification by visual analysis
- BS ISO 50001:2011 Energy management systems. Requirements with guidance for use
- BSi British Standards Institute
- BSI Certificate No. FM 1548 BSI Certificate No. FM 1548
- BSI FM 1548 BSI FM 1548
- DOTE 1017 Hot Applied Sealants, Joint Seals
- DOTE 901, Section 22 Joints for Road Pavements, Bituminous Bound Materials
- PAS 1192-3:2014 Specification for information management for the operational phase of assets using building information modelling
- QAS No. 2567/350 QAS No. 2567/350
- German Institute for Standardisation
- European Commission
- Canadian General Standards Board
- Canadian Acts and Regulations
- Factory Mutual
- Goods and Services Identification Number
- International Concrete Repair Institute
- Institute of Electrical and Electronics Engineers
- International Organization for Standardization
- International Slurry Surfacing Association
- Manufacturers Standard Society
- National Council Highway Research Program
- National Master Specification
- Standards of accredited organizations or other agencies
- Strategic Highway Research Program
- Society for Protective Coatings
- Transportation Association of Canada
- Underwriters Laboratory Inc.
- Underwriters' Laboratories of Canada
Other Standards
>
Comité Européen de Normalisation/European Committee for Standardization/Europaisches Komitee fur Normung
>
British Standards
>
BS EN 55022:1998 - Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55022:1998
| Name: | Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement |
| Code: | BS EN 55022:1998 |
| Description: | |
| Type: | Specification |
| Version: | |
| External References: |
Link to Document |