Search Results
Standard List
- Ontario Provincial Standards
- Region of Durham
- City of London
- Ontario Statutes, Regulations, etc
- ASTM International
- Canadian Standards Association
- Standards
- ASME A112.18.1/CSA B125.1 Plumbing Supply Fittings
- CAN/CSA - To Be Identified CAN/CSA - To Be Identified
- CAN/CSA-A14-07 Concrete Poles
- CAN/CSA-A165 Concrete Masonry Units (Consists of A165.1, A165.2 and A165.3)
- CAN/CSA-A179 Mortar and Grout for Unit Masonry
- CAN/CSA-A23.1/A23.2 Concrete Materials and Methods of Concrete Construction/Test methods and Standard Practices for Concrete
- CAN/CSA-A23.2-10C [See A23.2] Accelerating the Curing of Concrete Cylinders and Determining Their Compressive Strength
- CAN/CSA-A23.2-12A [See A23.2] Relative Density and Absorption of Coarse Aggregate
- CAN/CSA-A23.2-13C [See A23.2] Splitting Tensile Strength of Cylindrical Concrete Specimens
- CAN/CSA-A23.2-14A [See A23.2] Potential Expansivity of Aggregates; Procedure for Length Change Due to Alkali-Aggregate Reaction in Concrete Prisms
- CAN/CSA-A23.2-14C [See A23.2] Obtaining and Testing Drilled Cores For Compressive Strength Testing
- CAN/CSA-A23.2-16C [See A23.2] Resistance to De-Icing Salts
- CAN/CSA-A23.2-17C [See A23.2] Temperature of Freshly Mixed Hydraulic Cement Concrete
- CAN/CSA-A23.2-1A [See A23.2] Sampling Aggregates for Use in Concrete
- CAN/CSA-A23.2-1B [See A23.2] Viscosity, Bleeding, Expansion, and Compressive Strength of Flowable Grout
- CAN/CSA-A23.2-1C [See A23.2] Sampling Plastic Concrete
- CAN/CSA-A23.2-1D [See A23.2] Moulds for Forming Concrete Test Cylinders Vertically
- CAN/CSA-A23.2-23A [See A23.2] Method of Test for the Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
- CAN/CSA-A23.2-24A [See A23.2] Method of Test for Resistance of Unconfined Coarse Aggregate to Freezing and Thawing
- CAN/CSA-A23.2-25A [See A23.2] Test Method for Detection of Alkali-Silica Reactive Aggregate by Accelerated Expansion of Mortar Bars
- CAN/CSA-A23.2-26A [See A23.2)] Determination of Potential Alkali-Carbonate Reactivity of Quarried Carbonate Rocks by Chemical Compostion
- CAN/CSA-A23.2-27A [See A23.2] Standard Practice to Identify Potential for Alkali-Reactivity of Aggregates and Measures to Avoid Deleterious Expansion in Concrete
- CAN/CSA-A23.2-29A [See A23.2] Method of Test for the Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
- CAN/CSA-A23.2-2A [See A23.2] Sieve Analysis of Fine and Coarse Aggregate
- CAN/CSA-A23.2-3A [See A23.2)] Clay Lumps in Natural Aggregate
- CAN/CSA-A23.2-3C [See A23.2] Making and Curing Concrete Compression and Flexural Test Specimens
- CAN/CSA-A23.2-4A [See A23.2] Low Density Granular Material in Aggregate
- CAN/CSA-A23.2-4C [See A23.2] Air Content of Plastic Concrete By The Pressure Method
- CAN/CSA-A23.2-5A [See A23.2] Amount of Material Finer Than 80 Micron (um) in Aggregate
- CAN/CSA-A23.2-5C [See A23.2] Slump and Slump Flow of Concrete
- CAN/CSA-A23.2-6A [See A23.2] Relative Density and Absorption of Fine Aggregate
- CAN/CSA-A23.2-6B [See A23.2] Method of Test to Determine Adhesion by Tensile Load
- CAN/CSA-A23.2-6C [See A23.2] Density, Yield, and Cementing Materials Factor of Plastic Concrete
- CAN/CSA-A23.2-7A [See A23.2] Test for Organic Impurities in Fine Aggregates for Concrete
- CAN/CSA-A23.2-8C [See A23.2] Flexural Strength of Concrete (Using a Simple Beam with Thrid Point Loading)
- CAN/CSA-A23.2-9B [See A23.2] Freeze/Thaw Resistance
- CAN/CSA-A23.2-9C [See A23.2] Compressive Strength of Cylindrical Concrete Specimens
- CAN/CSA-A257 Concrete Pipe and Manhole Sections (Consists of A257.0, A257.1, A257.2, A257.3 and A257.4)
- CAN/CSA-A257.0 [See A257] Methods for Determining Physical Properties of Concrete Pipe
- CAN/CSA-A257.1 [See A257] Concrete Culvert, Storm Drain and Sewer Pipe
- CAN/CSA-A257.2 [See A257] Reinforced Concrete Culvert, Storm Drain and Sewer Pipe
- CAN/CSA-A257.3 [See A257] Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets
- CAN/CSA-A257.4 [See A257] Precast Circular Concrete Manhole Sections, Catch Basins and Fittings
- CAN/CSA-A3000 Cementitious Materials Compendium (Consists of A3001, A3002, A3003, A3004 and A3005)
- CAN/CSA-A3001 [See A3000] Cementitious Materials Used in Concrete
- CAN/CSA-A3003 [See A3000] Chemical Test Methods for Cementitious Materials for Use in Concrete and Masonry
- CAN/CSA-A3004 [See A3000] Physical Test Methods for Cementitious Materials for Use in Concrete and Masonry
- CAN/CSA-A440/A440.1 Windows / Special Publication A440.1-00 (R2005), User Selection Guide to CSA Standard CAN/CSA-A440-00, Windows
- CAN/CSA-B127.1 Asbestos Cement Drain, Waste and Vent Pipe and Pipe Fittings (Consists of Recommended Practice for the Installation of Components for Cement Drain, Waste, and Vent Pipe and Pipe Fittings)
- CAN/CSA-B137 Thermoplastic Pressure Piping Compendium (Consists of B137.0, B137.1, B137.2, B137.3, B137.4, B137.4.1, B137.5, B137.6, B137.8, B137.9, B137.10, B137.11 and B137.12)
- CAN/CSA-B137.1 (See B137) Polyethylene (PE) Pipe, Tubing and Fittings for Cold Water Pressure Services
- CAN/CSA-B137.10 (See B137) Crosslinked polyethylene/aluminum/ crosslinked polyethylene (PEX-AL-PEX) composite pressure-pipe systems
- CAN/CSA-B137.2 (See B137) Polyvinylchloride (PVC) Injection-Moulded Gasketed Fittings for Pressure Applications
- CAN/CSA-B137.3 (See B137) Rigid Polyvinylchloride (PVC) Pipe and Fittings for Pressure Applications
- CAN/CSA-B137.3.1 (See B137) Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications
- CAN/CSA-B137.4 (See B137) Polyethylene (PE) Piping Systems for Gas Services
- CAN/CSA-B137.4.1 (See B137) Electrofusion-Type Polyethylene (PE) Fittings for Gas Services
- CAN/CSA-B137.5 (See B137) Crosslinked Polyethylene (PEX) Tubing Systems for Pressure Applications
- CAN/CSA-B137.6 (See B137) Chlorinated Polyvinylchloride (CPVC) Pipe, Tubing, and Fittings for Hot and Cold Water Distribution Systems
- CAN/CSA-B137.8 (See B137) Polybutylene (PB) Piping Systems for Pressure Applications
- CAN/CSA-B137.9 (See B137) Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe Systems
- CAN/CSA-B1800 Thermoplastic NonPressure Piping Compendium - B1800 Series (Consists of B181.1, B181.2, B181.3, B181.5, B182.1, B182.2, B182.4, B182.6, B182.8, B182.11 and B182.13)
- CAN/CSA-B181.0 [See B1800] Definitions, General Requirements, and Methods of Testing for Thermoplastic Nonpressure Piping
- CAN/CSA-B181.1 [See B1800] Acrylonitrile-butadiene-styrene (ABS) Drain, Waste, and Vent Pipe and Pipe Fittings
- CAN/CSA-B181.2 [See B1800] Polyvinylchloride (PVC) and Chlorinated Polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings
- CAN/CSA-B181.3 [See B1800] Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Drainage Systems
- CAN/CSA-B181.5 [See B1800] Coextruded Acrylonitrile-Butadienestyrene/Polyvinylchloride (ABS/PVC) Drain, Waste, and Vent Pipe
- CAN/CSA-B182.1 [See B1800] Plastic Drain and Sewer Pipe and Pipe Fittings
- CAN/CSA-B182.11 [See B1800] Standard Practice for the Installation of Thermoplastic Drain, Storm, and Sewer Pipe and Fittings
- CAN/CSA-B182.12 Profile polypropylene (PP) storm sewer pipe and fittings
- CAN/CSA-B182.13 [See B1800] Profile Polypropylene (PP) Sewer Pipe and Fittings for Leak-Proof Sewer Applications
- CAN/CSA-B182.2 [See B1800] PSM Type Polyvinylchloride (PVC) Sewer Pipe and Fittings
- CAN/CSA-B182.3 (Discontinued) Large Diameter, Type IPS PVC Sewer Pipe and Fittings
- CAN/CSA-B182.4 [See B1800] Profile Polyvinylchoride (PVC) Sewer Pipe and Fittings
- CAN/CSA-B182.6 [See B1800] Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak-proof Sewer Applications
- CAN/CSA-B182.7 [See B1800] PSM Type Multilayer Polyvinylchloride (PVC) Sewer Pipe Having Reprocessed-Recycled Content (Withdrawn)
- CAN/CSA-B182.8 [See B1800] Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings
- CAN/CSA-B602 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe
- CAN/CSA-B64 Backflow Preventers and Vacuum Breakers (Consists of B64.0,B64.1.1,B64.1.2,B64.1.3,B64.2,B64.2.1,B64.2.1.1,B64.2.2,B64.3,B64.3.1,B64.4,B64.4.1,B64.5,B64.5.1,B64.6,B64.6.1,B64.7,B64.8,B64.9)
- CAN/CSA-B64.10/B64.10.1 [See B64] Selection and Installation of Backflow Preventers/Maintenance and Field Testing of Backflow Preventers
- CAN/CSA-B64.4 [See B64] Reduced pressure principle (RP) backflow preventers
- CAN/CSA-B64.5 [See B64] Double check valve (DCVA) backflow preventers
- CAN/CSA-B70 Cast Iron Soil Pipe, Fittings, and Means of Joining
- CAN/CSA-B70.1 Frames and Covers for Maintenance Holes and Catchbasins
- CAN/CSA-C2.1 Single-Phase and Three-Phase Liquid-Filled Distribution Transformers
- CAN/CSA-C2.2 Pole-Mounted, Single-Phase Distribution Transformers for Electric Utilities
- CAN/CSA-C22.2 NO. 0 General Requirements - Canadian Electrical Code, Part II
- CAN/CSA-C22.2 NO. 0.17 Evaluation of Properties of Polymeric Materials
- CAN/CSA-C22.2 NO. 0.4 Bonding of Electrical Equipment
- CAN/CSA-C22.2 NO. 107.2 Battery Chargers
- CAN/CSA-C22.2 NO. 144.1 Ground-Fault Circuit-Interrupters (Tri-National standard, with UL 943 and NMX-J-520-ANCE)
- CAN/CSA-C22.2 NO. 18.4 Hardware for the Support of Conduit, Tubing, and Cable (Bi-National standard, with UL 2239)
- CAN/CSA-C22.2 NO. 207-M89 Portable and Stationary Electric Signs and Displays
- CAN/CSA-C22.2 NO. 227.1 Electrical Nonmetallic Tubing (Bi-National standard, with UL 1653)
- CAN/CSA-C22.2 NO. 227.3 Nonmetallic Mechanical Protection Tubing (NMPT) (Bi-National standard, with UL 1696)
- CAN/CSA-C22.2 NO. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses (Tri-National standard, with UL 248-14 and NMX-J-009/248/14-2000-ANCE)
- CAN/CSA-C22.2 NO. 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements (Bi-National standard, with UL 60950-1)
- CAN/CSA-C22.2 NO. 74 Equipment for Use With Electric Discharge Lamps
- CAN/CSA-C22.2 NO. 94-M91 Special Purpose Enclosures
- CAN/CSA-C22.2 NO. 94.1 Enclosures for Electrical Equipment, Non-Environmental Considerations (Tri-National Standard, with NMX-J-235/1-ANCE-2007 and UL 50)
- CAN/CSA-C22.3 NO. 1 Overhead Systems
- CAN/CSA-C22.3 NO. 7 Underground Systems
- CAN/CSA-C227.3 Low-Profile, Single-Phase, Pad-Mounted Distribution Transformers with Separable Insulated High-Voltage Connectors
- CAN/CSA-C227.4 Three-Phase, Pad-Mounted Distribution Transformers with Separable Insulated High-Voltage Connectors
- CAN/CSA-C239 Performance Standard for Dusk-to-Dawn Luminaires
- CAN/CSA-C448 Design and Installation of Earth Energy Systems
- CAN/CSA-C49.1 (Discontinued) Round Wire, Concentric Lay, Overhead Electrical Conductors
- CAN/CSA-C653 Photometric performance of roadway lighting luminaires
- CAN/CSA-C68.5 Shielded and Concentric Neutral Power Cables Rated 5-46 kV
- CAN/CSA-G164 (Withdrawn - See A23.3) Hot Dip Galvanizing of Irregularly Shaped Articles
- CAN/CSA-G40.21 Structural Quality Steels
- CAN/CSA-O122 Structural Glued-Laminated Timber
- CAN/CSA-O15 Wood Utility Poles and Reinforcing Stubs
- CAN/CSA-O56 Round Wood Piles
- CAN/CSA-O80 CONSOLIDATED Wood Preservation
- CAN/CSA-O86 CONSOLIDATION Engineering Design in Wood
- CAN/CSA-S157/S157.1 Strength Design in Aluminum
- CAN/CSA-S269.1 (Not CSA Listed) Falsework for Construction Purposes
- CAN/CSA-S269.3 Concrete Formwork
- CAN/CSA-S6 Canadian Highway Bridge Design Code - Consists of S6-14 - Canadian Highway Bridge Design Code and S6.1-14 - Commentary on S6-14, Canadian Highway Bridge Design Code
- CAN/CSA-S806 Design and Construction of Building Structures with Fibre-reinforced Polymers
- CAN/CSA-Z107.9 (Withdrawn) Certification of Noise Barriers
- CAN/CSA-Z234.1 (Withdrawn) Metric Practice Guide
- CAN3-Z107.54 (Withdrawn) Procedure for Measurement of Sound and Vibration Due to Blasting Operations
- CSA B182.2 PVC Sewer Pipe and Fittings (PSM Type)
- CSA B182.4 Profile Polyvinylchoride (PVC) Sewer Pipe and Fittings
- CSA S807 Fibre-Reinforced Polymers
- CSA-23.3 Design of Concrete Structures
- CSA-A 23.2-11C Test Methods and Standard Practices for Concrete
- CSA-A23.1 Concrete Materials and Methods of Concrete Construction
- CSA-A23.1/A23.2 Concrete materials and methods of concrete construction / Test methods and standard practices for concrete
- CSA-A23.2 Test Methods and Standard Practices for Concrete
- CSA-A23.2-17C Test Methods and Standard Practices for Concrete
- CSA-A23.2-1C Test Methods and Standard Practices for Concrete
- CSA-A23.2-4C Test Methods and Standard Practices for Concrete
- CSA-A23.2-5C Test Methods and Standard Practices for Concrete
- CSA-A23.3 Design of Concrete Structures
- CSA-A23.4 Precast Concrete - Materials and Construction
- CSA-A23.5 (Replaced by A3001) [See A3000] Supplementary Cementing Materials
- CSA-A231.1/A231.2 Precast Concrete Paving Slabs/Precast Concrete Pavers
- CSA-A231.2 Precast Concrete Pavers
- CSA-A257.3 Standards for Concrete Pipe and Manhole Sections, Includes Update No. 1 (2010)
- CSA-A257.4 Standards for Concrete Pipe and Manhole Sections, Includes Update No. 1 (2010)
- CSA-A277 Procedure for Factory Certification of Buildings
- CSA-A283 Qualification Code for Concrete Testing Laboratories
- CSA-A3000 Cementitious Materials Compendium
- CSA-A362 [Replaced by A3000] Blended Hydraulic Cement
- CSA-A363 [Replaced by A3000] Cementitious Hydraulic Slag
- CSA-A370 Connectors for Masonry
- CSA-A456.1 [Replaced by A3000] Hydraulic Cement, Supplementary Cementing Materials, and Cementitious Hydraulic Slag
- CSA-A456.2 [Replaced by A3000] Hydraulic Cement, Supplementary Cementing Materials, and Cementitious Hydraulic Slag
- CSA-A456.3 [Replaced by A3000] Hydraulic Cement, Supplementary Cementing Materials, and Cementitious Hydraulic Slag
- CSA-A5 [Replaced by A3000] Portland Cement
- CSA-A60.1 (Withdrawn 2000) Vitrified Clay Pipe
- CSA-A60.2 (Withdrawn 2000) Vitrified Clay Pipe
- CSA-A60.3 (Withdrawn 2000) Vitrified Clay Pipe Joints
- CSA-A660 Certification of manufacturers of steel building systems
- CSA-A8 [Replaced by A3000] Masonry Cement
- CSA-A82 Fired Masonry Brick Made from Clay or Shale
- CSA-B111 (Withdrawn) Wire Nails, Spikes and Staples
- CSA-B137.1 Thermoplastic pressure piping compendium
- CSA-B137.10 Thermoplastic pressure piping compendium
- CSA-B137.2 Thermoplastic pressure piping compendium
- CSA-B137.3 Thermoplastic pressure piping compendium
- CSA-B137.3.1 Thermoplastic pressure piping compendium
- CSA-B182.1 Plastic Drain and Sewer Pipe and Pipe Fittings [Part of B1800-11, Plastic Nonpressure Pipe Compendium]
- CSA-B184 Polymeric subsurface stormwater management structures
- CSA-B184.1 [See B184] Polyethylene (PE) chambers
- CSA-B184.2 [See B184] Polypropylene (PP) chambers
- CSA-B196.3 PVC Underground Telecommunication Cable Ducting and Fittings
- CSA-B242 Groove and Shoulder Type Mechanical Pipe Couplings
- CSA-B51 Boiler, Pressure Vessel, and Pressure Piping Code
- CSA-B64.10 Selection and Installation of Backflow Preventers/Maintenance and Field Testing of Backflow Preventers
- CSA-B64.5 Backflow Preventers and Vacuum Breakers
- CSA-B651 Accessible Design for the Built Environment
- CSA-B95 (Withdrawn) Surface Texture (Roughness, Waviness and Lay)
- CSA-C199 Three-phase network distribution transformers
- CSA-C22.1-12 PACKAGE Canadian Electrical Code, Part I (22nd Edition), Safety Standard For Electrical Installations
- CSA-C22.2 NO. 0.12 Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less
- CSA-C22.2 NO. 100 Motors and Generators
- CSA-C22.2 NO. 106 HRC Fuses
- CSA-C22.2 NO. 107.1 General Use Power Supplies
- CSA-C22.2 NO. 107.3 Uninterruptible Power Systems (Bi-National standard, with UL 1778)
- CSA-C22.2 NO. 12 (Discontinued) Portable Luminaires
- CSA-C22.2 NO. 127 Equipment and Lead Wires
- CSA-C22.2 NO. 129 Neutral Supported Cables
- CSA-C22.2 NO. 131 Type TECK 90 Cable
- CSA-C22.2 NO. 139 Electrically Operated Valves
- CSA-C22.2 NO. 14 Industrial Control Equipment
- CSA-C22.2 NO. 158 Terminal Blocks
- CSA-C22.2 NO. 18.1 Metallic Outlet Boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)
- CSA-C22.2 NO. 18.2 Nonmetallic Outlet Boxes
- CSA-C22.2 NO. 18.3 Conduit, Tubing, and Cable Fittings ((Tri-National standard, with ANCE NMX-J-017 and UL 514B)
- CSA-C22.2 NO. 182.2 Industrial Locking Type, Special Use Attachment Plugs, Receptacles and Connectors
- CSA-C22.2 NO. 182.3 Special Use Attachment Plugs, Receptacles and Connectors
- CSA-C22.2 NO. 188- Splicing Wire Connectors (Tri-national standard, with UL 486C and NXM-J- 548-ANCE)
- CSA-C22.2 NO. 197 PVC Insulating Tape
- CSA-C22.2 NO. 205 Signal Equipment
- CSA-C22.2 NO. 206 Lighting Poles
- CSA-C22.2 NO. 211.0 General Requirements and Methods of Testing for Nonmetallic Conduit
- CSA-C22.2 NO. 211.1 Rigid Types EB1 and DB2/ES2 PVC Conduit
- CSA-C22.2 NO. 211.2 Rigid PVC (Unplasticized) Conduit
- CSA-C22.2 NO. 211.3 (Superseded by CSA NO. 2420) Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Bi-National standard, with UL 1684)
- CSA-C22.2 NO. 213 Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
- CSA-C22.2 NO. 214 Communications cables (Bi-national standard, with UL 444)
- CSA-C22.2 NO. 227.2.1 Liquid-Tight Flexible Nonmetallic Conduit (Bi-National standard, with UL 1660)
- CSA-C22.2 NO. 232 Optical fiber cables
- CSA-C22.2 NO. 239 Control and Instrumentation Cables
- CSA-C22.2 NO. 2420 Belowground reinforced thermosetting resin conduit (RTRC) and fittings (Bi-national standard, with UL 2420)
- CSA-C22.2 NO. 248.1 Low-Voltage Fuses - Part 1: General Requirements (Tri-National standard, with UL 248-1 and NMX-J-009/248/1-2000-ANCE)
- CSA-C22.2 NO. 248.8 Low-Voltage Fuses - Part 8: Class J Fuses (Tri-National standard, with UL 248-8 and NMX-J-009/248/8-2000-ANCE)
- CSA-C22.2 NO. 250.0 Luminaires (Tri-national standard, with UL 1598 and NMX-J-307/1-ANCE)
- CSA-C22.2 No. 2515 Aboveground reinforced thermosetting resin conduit (RTRC) and fittings (Bi-national standard, with UL 2515)
- CSA-C22.2 NO. 29 Panelboards and Enclosed Panelboards
- CSA-C22.2 NO. 35 Extra-Low-Voltage Control Circuit Cables, Low-Energy Control Cable and Extra-Low-Voltage Control Cable
- CSA-C22.2 NO. 38 Thermoset-Insulated Wires and Cables (Tri-National standard, with UL 44 and ANCE NMX-J-451)
- CSA-C22.2 NO. 39 Fuseholder Assemblies
- CSA-C22.2 NO. 40 Cutout, Junction and Pull Boxes
- CSA-C22.2 NO. 41 Grounding and Bonding Equipment (Bi-National standard, with UL 467)
- CSA-C22.2 NO. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
- CSA-C22.2 NO. 43 Lampholders (Bi-National standard, with UL 496)
- CSA-C22.2 NO. 45 Rigid Metal Conduit
- CSA-C22.2 No. 45.1-07 Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007)
- CSA-C22.2 NO. 47 Air-Cooled Transformers (Dry Type)
- CSA-C22.2 NO. 49 Flexible Cords and Cables (Tri-National standard, with UL 62 and ANCE NMX-J-436-2014)
- CSA-C22.2 NO. 5 Molded-Case Circuit Breakers, Molded-Case Switches and Circuit-Breaker Enclosures (Tri-National standard, with UL 489 and NMX-J-266-ANCE)
- CSA-C22.2 NO. 55 Special Use Switches
- CSA-C22.2 NO. 59 (Discontinued) Fuses (Bot Plug and Cartridge Enclosed Types)
- CSA-C22.2 NO. 62 Surface Raceway Systems
- CSA-C22.2 NO. 65 Wire Connectors (Tri-National Standard, with UL 486A-486B and NMX J 543 ANCE 03)
- CSA-C22.2 NO. 66.1 Low Voltage Transformers - Part 1: General Requirements (Bi-National standard, with UL 5085-1)
- CSA-C22.2 NO. 66.2 Low Voltage Transformers - Part 2: General Purpose Transformers (Bi-National standard, with UL 5085-2)
- CSA-C22.2 NO. 66.3 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers (Bi-National standard, with UL 5085-3)
- CSA-C22.2 NO. 75 Thermoplastic-Insulated Wires and Cables (Tri-National standard, with UL 83 and NMX-J-010-ANCE-2003)
- CSA-C22.2 NO. 76 Splitters
- CSA-C22.2 NO. 83 Electrical Metallic Tubing
- CSA-C22.2 NO. 84 Incandescent Lamps
- CSA-C22.2 NO. 85 Rigid PVC Boxes and Fittings
- CSA-C22.2 NO. 89 Swimming-Pool Luminaires, Submersible Luminaires and Accessories
- CSA-C22.2 NO. 9.0 General Requirements for Luminaires
- CSA-C22.3 NO. 5.1 Recommended Practices for Electrical Protection - Electric Contact Between Overhead Supply and Communication Lines
- CSA-C227.5 Three-Phase Live-Front Pad-Mounted Distribution Transformers
- CSA-C233 (Discontinued) Non-Linear Resistor, Valve, Type Lightning Arrestors for Alternating Current Systems
- CSA-C49.2 Compact Aluminum Conductors Steel Reinforced (ACSR)
- CSA-C49.3 Aluminum Alloy 1350 Round Wire, All Tempers, for Electrical Purposes
- CSA-C57 Electric Power Connectors for Use in Overhead Line Conductors
- CSA-C811 Performance of Highmast Luminaires for Roadway Lighting
- CSA-C83 Communication and Power Line Hardware - Electrical Engineering
- CSA-C9 Dry-Type Transformers
- CSA-G12 Zinc-Coated Steel Wire Strand
- CSA-G164 Hot Dip Galvanizing of Irregularly Shaped Articles
- CSA-G189 (Withdrawn) Sprayed Metal Coatings for Atmospheric Corrosion Protection
- CSA-G279 (Not CSA Listed) Steel for Prestressed Concrete Tendons
- CSA-G30.14 (Not CSA Listed) Deformed Steel Wire for Concrete Reinforcement (Withdrawn)
- CSA-G30.15 (Withdrawn) Welded Deformed Steel Wire Fabric for Concrete Reinforcement
- CSA-G30.18 Carbon Steel Bars for Concrete Reinforcement
- CSA-G30.18- Billet-Steel Bars for Concrete Reinforcement
- CSA-G30.3 (Withdrawn) Cold Drawn Steel Wire for Concrete Reinforcement (Withdrawn)
- CSA-G30.5 (Withdrawn) Welded Steel Wire Fabric for Concrete Reinforcement (Withdrawn)
- CSA-G4 Steel Wire Rope for General Purpose and for Mine Hoisting and Mine Haulage
- CSA-G40.20/G40.21 Rolled or Welded Structural Quality Steel/Structural Quality Steels
- CSA-G401 Corrugated Steel Pipe Products
- CSA-G42 (Not CSA Listed) Galvanized (Zinc-Coated) Steel Farm-Field Wire Fencing
- CSA-N287.2 Material Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants
- CSA-N287.3 Design requirements for concrete containment structures for nuclear power plants
- CSA-O121 Douglas Fir Plywood
- CSA-O122 Structural Glued-Laminated Timber
- CSA-O141 Softwood Lumber
- CSA-O151 Canadian Softwood Plywood
- CSA-O177 Qualification Code for Manufacturers of Structural Glued-Laminated Timber
- CSA-O86 Engineering Design in Wood
- CSA-S136-12 PACKAGE North American Specification for the Design of Cold-Formed Steel Structural Members and S136.1-12 - Commentary on North American specification for the design of cold-formed steel structural members
- CSA-S157 / S157.1 Strength Design in Aluminum/Commentary on CSA S157-05, Strength Design in Aluminum
- CSA-S16 Design of steel structures
- CSA-S250 Mapping of underground utility infrastructure
- CSA-S269.1 Falsework for Construction Purposes
- CSA-S269.3 Concrete Formwork
- CSA-S6 Canadian Highway Bridge Design Code
- CSA-W178.1 Certification of Welding Inspection Organizations (Developed in cooperation with the Canadian Welding Bureau)
- CSA-W178.2 Certification of Welding Inspectors (Developed in cooperation with the Canadian Welding Bureau)
- CSA-W186 Welding of Reinforcing Bars in Reinforced Concrete Construction
- CSA-W47.1 Certification of Companies for Fusion Welding of Steel Structures
- CSA-W47.2 Certification of Companies for Fusion Welding of Aluminum
- CSA-W48 Filler Metals and Allied Materials for Metal Arc Welding (Developed in cooperation with the Canadian Welding Bureau)
- CSA-W59 Welded Steel Construction (Metal Arc Welding)
- CSA-W59.2 Welded Aluminum Construction
- CSA-Z245.1 Steel Pipe
- CSA-Z245.20 Plant-applied external coatings for steel pipe
- CSA-Z662-07 PACKAGE Consists of Z662-07, Oil and Gas Pipeline Systems and Z662.1-07, Commentary on CSA Z662-07, Oil and Gas Pipeline Systems
- Other Standards
Canadian Standards Association
>
Standards
>
CAN/CSA-S157/S157.1 - Strength Design in Aluminum
CAN/CSA-S157/S157.1
| Name: | Strength Design in Aluminum |
| Code: | CAN/CSA-S157/S157.1 |
| Description: | |
| Type: | Specification |
| Version: | 2005 (reaffirmed 2015) |
| Date: | 2015-01-01 |
| External References: |
Link to Document |