Search Results
Standard List
- Ontario Provincial Standards
- Region of Durham
- Construction Specifications
- Standard Drawings
- S-100 Series - Storm and Sanitary Sewers
- S-200 Series - Watermain
- RMDSD S-200.010 Sanitary, Storm and Water (Main and Service) Pipe Bedding and Concrete Encasement Details
- RMDSD S-200.020 Trench Restoration Detail
- RMDSD S-200.030 Supports for Watermain, Sewers, Piping and Conduits Crossing Trenches
- RMDSD S-200.040 Concrete Trench Plugs for PVC and Rigid Pipe (Watermains and Sewers)
- RMDSD S-200.050 Joint Restraining Length for PVC Pipe (in Combination with Granular Thrust Block)
- RMDSD S-200.060 Thrust Block for PVC Watermains for Hydrant Runouts, Tees and Dead Ends
- RMDSD S-200.070 Deflection of Watermain Over ad Under Sewer
- RMDSD S-200.080 Pipe Casing
- RMDSD S-200.090 Watermain Trench Detail Under Water Course
- RMDSD S-201.010 Replacing Buried AC or Grey Iron Watermain
- RMDSD S-201.020 Water and Sewer Mains Location Sign
- RMDSD S-201.030 Cathodic Protection/Bonding Cable/Tracer Wire for PVC and CPP Watermain Systems
- RMDSD S-201.031 Cathodic Protection/Bonding Cable for Existing Ferrous Watermain Systems
- RMDSD S-201.050 Test Point and Flushing Configuration for Large Diameter Feedermain
- RMDSD S-210.010 Hydrant Set with Mechanically Restrained Joints
- RMDSD S-210.020 Hydrant Barrier
- RMDSD S-210.030 Hydrant Access Across Ditch
- RMDSD S-210.040 19 mm Test Point By-Pass Less Than 400 mm
- RMDSD S-210.041 Temporary Valve By-Pass Arrangement
- RMDSD S-210.060 50 mm Blowoff
- RMDSD S-210.070 Water Sampling Station
- RMDSD S-210.080 Automatic Flushing Device
- RMDSD S-220.010 100 mm to 400 mm Gate Valve, Valve Box and Tracer Wire Arrangment for PVC or CPP Watermain
- RMDSD S-220.020 Butterfly Valve and Valve Box (400 mm to 500 mm CPP)
- RMDSD S-220.030 400 mm Butterfly Valve and Valve Box (other than CPP Watermain)
- RMDSD S-220.031 600 mm Butterfly Valve and Precast Concrete Chamber
- RMDSD S-220.040 Valve Stem Extension and Bracket
- RMDSD S-220.050 Air Valve & Access Chamber (for Watermains up to 750 mm)
- RMDSD S-220.051 Air Valve & Access Chamber (For Watemains 900 mm to 1500 mm)
- RMDSD S-220.060 Drain Valve in Chamber 100 mm, 150 mm and 200 mm
- RMDSD S-230.010 Sevice Connection Location Single Family Residential Lots (New Connections)
- RMDSD S-230.011 Piping & Fittings for Commercial, Industrial & Multi-Residential Connections (Domestic & Fireline)
- RMDSD S-230.020 19 mm and 25 mm Copper Watrer Service
- RMDSD S-230.021 37 mm and 50 mm Copper Water Service
- RMDSD S-230.030 Water Service Box Cap
- RMDSD S-230.031 Water Service Box
- RMDSD S-240.010 Meter, Valve, Pro Read Arb Receptical and Wire Installation
- RMDSD S-240.020 Water Meter Room Layout
- RMDSD S-240.030 Incoming Water Service and Meter Schematic (Fireline Off Single Feed) Sprinkler System
- RMDSD S-240.040 Backflow Prevention Room or Building Layout Private Hydrant and Sprinkler System
- RMDSD S-240.041 Combined Meter Room, Backflow Prevention Device Room Layout Private Hydrant and Sprinkler System
- RMDSD S-240.050 Backflow Prevention Room or Building Layout Sprinkler System
- RMDSD S-240.051 Combined Meter Room, Backflow Prevention Device Room Layout Sprkinler System
- RMDSD S-240.060 Seasonal Use Water Meter Cabinet
- RMDSD S-240.061 Water Meter Pit Setter (19 mm to 25 mm Meter)
- S-300 Series - Roads
- S-400 Series - Traffic Signals
- S-500 Series - Transit
- City of London
- Ontario Statutes, Regulations, etc
- ASTM International
- Canadian Standards Association
- Other Standards
Region of Durham
>
Standard Drawings
>
S-200 Series - Watermain
>
RMDSD S-210.010 - Hydrant Set with Mechanically Restrained Joints
RMDSD S-210.010
Name: | Hydrant Set with Mechanically Restrained Joints |
Code: | RMDSD S-210.010 |
Description: | |
Type: | Drawing |
Version: | Rev 18 |
Date: | 2014-04-30 |
Document: | View Standard (opens in new tab) |